STUDI BANGKITAN LONCAT AIR DENGAN MODEL PINTU SORONG DALAM FENOMENA LONCAT AIR PADA SALURAN TERBUKA
Abstract
The empirical formula to measure the length of hydraulic jump stated by experts is different
from one another. In general, the difference in the formula lies in the coefficient value of the hydraulic
jump (Cj). The study is to determine the ratio between the coefficient value in the observation (Cj) and
the theoretical coefficient value (Cj), to find out the comparison between the length of hydraulic jump
in the observation and the theoretical length of hydraulic jump, to find out the flow characteristics, and
to find out the effect of hydraulic jump on the length of hydraulic jump. This research was conducted
at the Hydraulic Laboratory, Department of Civil Engineering, Faculty of Civil Engineering and
Planning, Islamic University of Indonesia, Yogyakarta.
The method used was the experimental method. The parameters observed were the discharge
time (t), the height of hydraulic jump upstream (h1), the height of hydraulic jump downstream (h2) and
the length of hydraulic jump (Lj). Two variations of discharge were used in the observation. Gate
openings used were 1 cm and 1.3 cm.
The results of this study reveal ten steady jumps with Fr = 4.5 - 9.0, two strong jumps with Fr >
9.0 and four insulated jumps with Fr = 2.5 - 4.5, the length of hydraulic jump in the observation has the
smallest deviation compared to the length of hydraulic jump in Smetana's theory, the smallest
deviation in the length of hydraulic jump in the observation compared to the length of regression
hydraulic jump is 0.102%, the length of regression hydraulic jump has the smallest deviation compared
to the length of hydraulic jump in Smetana's theory. The coefficient value of the length of hydraulic
jump (Cj) during the observation matches the coefficient value of the length of hydraulic jump in
USBR theory the best. The change in the height of hydraulic jump downstream compared to the height
of hydraulic jump upstream (h2/h1) has an effect of 66.9% on the length of hydraulic jump (Lj).
Collections
- Civil Engineering [4247]