| dc.description.abstract | Global industrialization leads to fiercer competition. To survive in competition, companies
must optimize their resources and produce qualified products while reducing work accidents.
Work accidents could occur because people are less warned or demonstrate careless actions
while doing their job. In the industry of concrete bricks, some still use manual and some already
use the machine. To reduce risk and injury in the workplace, a quality OSH is needed to reduce
the chance of work accidents. This research aims to identify the risks from the hazards involved
in the production process in Pusat Inovasi Material Vulkanis Merapi UII. The research data of
this research is primary data, which is using literature review and field study, and secondary
data, which is using AS/NZS 4360 and ISO 31000. The instruments of this research are
observation sheets and interview sheets. The methods to collect data in this research are
observation, interview, and literature study. The type of research used in this research is
qualitative descriptive using the HIRARC method. The result of this research is From Hazard
Identification, which reveals that there are several hazards of work-related concrete
brickmaking. The hazards are getting sand by stooping, carrying out the bucket of sand, the
bucket does not have rubber on it, a wet area close to the electric source, carrying out the sack
of cement, clamping, slipping, carrying up while stooping, and carry up the concrete brick.
Risk Assessment before risk control exposes the absence of extreme levels of risk, 54% high
level of risk, 38% moderate level of risk, and 8% low level of risk. From Risk Control, several
activities were identified to reduce the risk that may cause work accidents. The activities are
using a long shovel, using a cart, safety gloves, and an isolation electric source, cart, clear the
workplace, making a pipe from the mixer into a Mold, and squatting while lifting the concrete
brick. This research concludes that the method of HIRARC can be used to identify hazards,
identify risks and their levels, and finally determine activities to control the risks. | en_US |
